KEPCO BOP-ME 1KW, Operator'S Manual

Page: 95 / 234

BOP HIPWR 091719
3-19
The internal paraCurrent Protect Min and –Current Protect Max are displayed to com-
pletely define the permissible window when operating in Voltage mode. Similarly, +Voltage Pro-
tect Min, and –Voltage Protect Max are displayed to completely define the permissible window
for voltage when operating in Current mode.
TABLE 3-5. MAX/MIN SETTINGS MENU
SETTING
CHOICES
( BOLD = Factory Default)
FUNCTION
VOLTAGE MODE
+Voltage Max (value)
+Eomax
Defines the maximum voltage level that can be set in voltage mode. Default =
Rated +Output voltage (e.g., for BOP 36-28MG, Eomax = 36). To modify, see
PAR. 3.3.4.1.
–Voltage Min (value)
–Eomax
Defines the minimum (maximum negative) voltage level that can be set in volt-
age mode. Default = Rated –Output voltage (e.g., for BOP 36-28MG, Eomax =
36). To modify, see PAR. 3.3.4.1.
+C Protect Max (value) model specific
up to Iomax + 1% of Iomax
Defines the maximum value for +Current Protect. To modify refer to 3.3.4.1.
+C Protect Min (internal value)
Not Adjustable
Defines the minimum value that +Current Protect can be set to. This is a model-
dependent constant, approximately 0.2% of I
Onom
and is not adjustable from the
front panel.
–C Protect Min (value) model specific
up to Iomax + 1% of Iomax
Defines the minimum (maximum negative) value for –Current Protect. To modify
refer to 3.3.4.1.
–C Protect Max (internal value)
Not Adjustable
Defines the maximum (minimum negative) value that –Current Protect can be
set to. This is a model-dependent constant, approximately 0.2% of I
Onom
and is
not adjustable from the front panel.
CURRENT MODE
+Current Max (value)
+Iomax
Defines the maximum current level that can be set in current mode. Default =
Rated +Output current (e.g., for BOP 36-28MG, Iomax = 28). To modify, see
PAR. 3.3.4.1.
–Current Min (value)
–Iomax
Defines the minimum (maximum negative) current level that can be set in current
mode. Default = Rated –Output current (e.g., for BOP 36-28MG, Iomax = 28). To
modify, see PAR. 3.3.4.1.
+V Protect Max (value)
Eomax +1% of Eomax
Defines the maximum value that +Voltage Protect can be set to. To modify refer
to 3.3.4.1.
+V Protect Min (internal value)
Not Adjustable
Defines the minimum value that +Voltage Protect can be set to. This is a model-
dependent constant, approximately 0.2% of E
Onom
and is not adjustable from
the front panel.
–V Protect Min (value)
Eomax + 1% of Eomax
Defines the minimum (maximum negative) value for –Voltage Protect. To modify
refer to 3.3.4.1.
–V Protect Max (internal value)
Not Adjustable
Defines the maximum (minimum negative) value that –Voltage Protect can be
set to. This is a model-dependent constant, approximately 0.2% of I
Onom
and is
not adjustable from the front panel.
NOTE: To restore all Max/Min settings defaults, press
%
from the power-up screen, highlight Max/Min settings, press
!
, then
press
@
to restore defaults shown above in BOLD . Press
$
to save for power-up or
%
to apply the changes (without
saving for power-up) and exit.