KEPCO BOP-ME 1KW, Operator'S Manual

Page: 58 / 234

2-16
BOP HIPWR 091719
2.7.6 SETUP FOR REMOTE OPERATION VIA LAN (ME MODELS ONLY)
With all power off, connect the load to the BOP using either local or remote sensing (refer to
PAR. 2.5). If units are to be connected in series or parallel, refer to PAR. 2.7.6.2.
Connect the BOP to a Microsoft Windows-based computer via the LAN connector (see Figure 2-
1 and Table 2-1). Use a standard ethernet cable, whether using a router or hub, or connecting
the BOP 1KW directly to a computer. The BOP 1KW-ME is Auto-MDI-X enabled and does not
require a crossover cable for direct connection. For Unix and Safari connections see ???
2.7.6.1 FINDING KEPCO POWER SUPPLIES ON THE LAN.
The PSfind utility can be downloaded from the Kepco web site at
www.kepcopower.com/drivers/drivers-dl3.htm#bop1k
This utility finds all operational Kepco power supplies connected to the LAN and then shows the
MAC and IP addresses of the models found.
To run the utility from your PC download the psfind.zip file to your computer. Extract psfind.exe
from the zip file to a location of your choice, then double-click psfind.exe to run the application.
A separate window opens as shown in Figure 2-6. Once the search is completed, all found units
are displayed in the Select a Unit window (the MAC address appears in parentheses). If you do
not see your device in the
Select a Unit window or if the icon to the left of the selected instru-
ment is red (not green), make sure it is turned on and connected to the network, then click the
Search Again button.
FIGURE 2-6. PS FIND SCREEN
2.7.6.2 BONJOUR-ENABLED DISCOVERY
Figure 2-7 shows the BOP 10-100ME found among other Bonjour (MDNS)-enabled devices.
Most printers and all LXI Version 1.4-compliant devices support the industry standard discovery
methods requiring no user action.|