![background image](http://html1.mh-extra.com/html/keithley/2651a/2651a_reference-manual_661729062.webp)
Section 2: General operation
Model 2651A High Power System SourceMeter® Instrument Reference Manual
2-40
2651A-901-01 Rev. A / March 2011
To save a user setup to an external USB flash drive:
1. Configure the Model 2651A for the desired operating modes to be saved.
2. Insert the USB flash drive into the USB port on the front panel of the Model 2651A.
3. Press
the
MENU
key, then select
SETUP
, then press the
ENTER
key.
4. Select
SAVE
menu item, then press the
ENTER
key.
5. Select
USB1
. The file
setup000.set
is displayed.
6. Turn the navigation wheel
to change the last three digits of the file name and then press the
ENTER
key.
Recalling a saved setup
You can recall setups from internal nonvolatile memory or a USB flash drive at any time. To recall a
saved setup:
1. Press
the
MENU
key to access the main menu.
2. Select
SETUP
, and then press the
ENTER
key.
3. Select
the
RECALL
menu item, and then press the
ENTER
key.
4. Select one of the following:
•
INTERNAL
•
USB1
5. (INTERNAL only) Do one of the following:
•
Select the user number (1 through 5), then press the
ENTER
key.
•
Select
FACTORY
to restore factory defaults, then press the
ENTER
key.
6. (USB1 only) Select the appropriate file and then press the
ENTER
key.
Start-up configuration
You can specify the Model 2651A start-up (power-on) configuration from the front panel. Set the
start-up configuration to a previously stored setup (recalled from internal nonvolatile memory) or reset
to the factory default setup. To select the power-on setup:
1. Press
the
MENU
key to access the main menu.
2. Select
SETUP
, and then press the
ENTER
key.
3. Select
POWERON
, and then press the
ENTER
key.
4. Do one of the following:
•
Select
FACTORY
to load the original defaults.
•
Select
USER NUMBER
(1 through 5) to load a user preference.
5. Press
the
ENTER
key.
6. Press
the
EXIT (LOCAL)
key to return to the main menu.