Model 2651A High Power System SourceMeter® Instrument Reference Manual
Section 7: Command reference
2651A-901-01 Rev. A / March 2011
7-29
Figure 99: ConfigPulseIMeasureVSweepLin()
Pulse initiated here
toff
Measurement (1/NPLC seconds)
ton
bias
level
start
step
step
stop
step = (stop - start)/(points -1)
Last source value before pulse train was initiated
Example
ConfigPulseIMeasureVSweepLin(smua, 0,
0.01, 0.05, 1, 1e-3, 0.1, 20,
smua.nvbuffer2, 3)
Set up a pulsed sweep that will use SourceMeter
instrument channel A. The pulsed sweep will start at
10 mA, end at 50 mA, and return to a 0 mA bias level
between pulses. Each pulsed step will be on for 1 ms,
and then at the bias level for 100 ms. The voltage
limit will be 1 V during the entire pulsed sweep. The
pulse train will be comprised of 20 pulsed steps and
the pulse train will be assigned a
tag
index of 3.
Also see
ConfigPulseIMeasureVSweepLog()
(on page 5-23) function configures a voltage pulse train with a current measurement at
each point.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function No
