K-M
IX
H
ARDWARE
75
4.3.3 – E
XTERNAL
MIDI C
ONTROL
O
F
M
IX
B
ANK
The Mix bank parameters on K-Mix are controlled by sending specific MIDI messages to the
K-Mix Audio
Control
port. MIDI sent to the K-Mix Expander or
K-Mix Control Surface
ports will not do anything related to
the Mix bank.
With the exceptions of channel soloing, stereo pairing, and Aux Pre/Post switches, nearly all K-Mix
parameters that can be controlled from the hardware can be controlled via MIDI messages sent to K-Mix.
Standard MIDI messages are ranged from 0–127; since K-Mix’s Mix bank parameters come in a variety of
ranges, incoming MIDI messages will be scaled to the appropriate range for each mixer parameter.
•
Fader Parameters
= 0–127 (minimum to maximum)
•
Rotary Parameters
= 0–127 (minimum to maximum)
•
Switch/Button Parameters
= 0 (off); 1–127 (on)
4.3.3.1 – MIDI C
HANNELS
Since there are more than 128 editable parameters on K-Mix, the MIDI messages to control them have
been spread out across different MIDI channels.
•
MIDI Channel 1
= Input Channel 1 Settings
•
MIDI Channel 2
= Input Channel 2 Settings
•
MIDI Channel 3
= Input Channel 3 Settings
•
MIDI Channel 4
= Input Channel 4 Settings
•
MIDI Channel 5
= Input Channel 5 Settings
•
MIDI Channel 6
= Input Channel 6 Settings
•
MIDI Channel 7
= Input Channel 7 Settings
•
MIDI Channel 8
= Input Channel 8 Settings
•
MIDI Channel 9
= Main Output Settings
•
MIDI Channel 10
= Misc. Settings (Reverb, Surround, Auxes)
When automating K-Mix parameters, MIDI data response can get backlogged if too
many messages occur simultaneously.
External MIDI messages for controlling K-Mix will ignore
Pass Thru
if it is enabled.
Summary of Contents for K-MIX
