Keith McMillen Instruments K-MIX, User Manual

Page: 109 / 156

K-M
IX
E
DITOR
98
I
NPUT
T
RIM
The input trim knob controls the input trim level of the currently selected
channel.
• Turn clockwise to increase the value; turn counterclockwise to
decrease the value.
• A specific value may be entered into the accompanying number
box as an alternative way of setting the trim level.
Channels 1–2 have a different range than channels 3–8:
• Range (Channels 1–2) : 0dB – +60dB
• Range (Channels 3–8) : -20dB – +40dB
R
UMBLE
F
ILTER
K-Mix’s rumble filter is an adjustable high-pass filter intended for filtering
out low frequency rumbles and handling noise that may occur when
using microphones as input.
B
YPASS
B
UTTON
Toggles the input rumble filter for the currently selected channel on
or off.
• The button will light up white when enabled (rumble filter on).
• The button will go dark when disabled (rumble filter off).
• By default, the rumble filter will be off.
R
UMBLE
F
ILTER
F
REQUENCY
Controls the center frequency of the input rumble filter.
• Turn clockwise to increase the frequency; turn counterclockwise to decrease the frequency.
•
A specific value may be entered into the accompanying number box as an alternative way
of setting the frequency.
• Range : 40Hz – 400Hz
Input Trim
1.50 dB
224 Hz
Rumble Filter
This is an editor-only parameter. It may not be adjusted from the mixer.
This is an editor-only parameter. It may not be adjusted from the mixer.