MS48IP Programming Guide
74
Saving The Flexible Numbering:
This program saves all the flexible numbering plan to the non-volatile memory of the
system.
8 8 6 6
Notes
The modifications, which have not been saved, can be lost in case of power failure.
Reloading The Access Table:
This program reloads the recently saved flexible numbering plan to the table.
8 8 6 5
Notes
Each time the system is powered on and once everyday in normal operation mode,
the flexible numbering table is reloaded from the non-volatile memory. The system
uses the flexible numbering table is daily operation. If any inconvenience is
monitored in this table, this code can be used to reload the table.
SUMMARY:
When “8” Cannot be used:
If “8” is accidentally cleared by dialing this code before a new code is assigned for
“8”, or if you forget the new access code for “8”, the system will reject every code
(including the program codes) beginning with 8. In that case (provided that a
KAREL Console or Feature Phone is used):
Press “8” until “88” is seen on the display of the telephone, dial “77777” to enter the
Programming Mode
, press “8” once more until “88” is seen on the display of the
telephone and then dial “869” to restart
Flexible Numbering
.
