MS48IP Programming Guide
57
4. If S = 1, then A defined in the night mode is the fax extension. The items below
explain this in detail.
-
In
Day Mode
When the ringing extension answers the call the systems
checks the incoming tone.
*
If it is a fax call, it is diverted to fax extension. If fax extension does not
answer the call for 6 ringing periods, the call is diverted to the ringing
extension. D is released if the ringing extension does not answer the
call for 9 ringing periods.
*
If it is not a fax call, the ringing extension goes on conversing.
-
In
Night Mode
, the system answers all incoming calls through D
automatically and then checks the incoming tone. In the meantime, the
external caller waits with ring-back tone as long as 10 seconds.
*
If it is a fax call, it is diverted to fax extension. D is released if the fax
extension does not answer the call for 6 ringing periods.
*
If it is not a fax call, it is diverted to the operator and D is released if the
operator does not answer the call for 5 ringing periods.
5. If S = 2, then A defined in the night mode is the fax extension. The items below
explain this in details:
-
In
Day Mode
, the system answers all incoming calls through D
automatically and then checks the incoming tone. In the meantime, the
external caller waits with ring-back tone as long as 10 seconds.
*
If it is a fax call, it is diverted to the fax extension. If “Polarity Reversal”
facility has been activated the fax extension rings for maximum 6/9
ringing periods until polarity reversal is detected on D.
*
If “Polarity Reversal” facility has not been activated, D is released if the
ringing extension does not answer the call for 4 ringing periods.
*
If it is not a fax call, it is diverted to the ringing extension. D is released
if the ringing extension does not answer the call for 5 ringing periods.
-
In
Night Mode
, the system answers all incoming calls through D
automatically and then checks the incoming tone. In the meantime, the
external caller waits with ring-back tone as long as 10 seconds.
* If it is a fax call, it is diverted to the fax extension. If “Polarity Reversal”
facility has been activated the fax extension rings for maximum 6/9
ringing periods until polarity reversal is detected on D.
*
If “Polarity Reversal” facility has not been activated, D is released if the
ringing extension does not answer the call for 4 ringing periods.
*
If it is not a fax call, it is diverted to the operator and D is released if the
operator does not answer the call for 5 ringing periods.
6. If there is not EVM-DL module installed on the system, parameter T cannot be
entered.
7. If parameter T is entered as 1, then the ACD lines function as normal lines.
