MS48IP Programming Guide
71
Digit Access Code:
This program changes the digit values, so that the feature access codes or
extensions access codes, having this digit are also changed.
8 8 6 0 0 B E
Parameters
B
:
0, 3...9
The digit to be modified.(1 and 2 cannot be changed)
E
:
The new access code. (minimum 1, maximum 4 digits)
Notes
1. A new access code can be entered for any extension or a line through this
program. If the entered access code is of 4 digits, then dial tone or the invalid
operation tone is received after entering the last digit. If dial tone is received,
then the entered code does not coincide with any other code and the operation
has been accomplished. On the other hand, if the invalid operation tone is
received, then that means the code coincides with other codes, thus the
operation has not been accomplished. If the entered access code is of less than
4 digits, then the operation should be terminated with “*” key. (If the operation is
attempted to be terminated by hanging up, then it cannot be accomplished.) In
that case, either dial tone or the invalid operation tone is received. For the
invalid operation case, either the coincided code must be replaced by another,
or must be temporarily deleted. Clearing access codes facilitates the entry of a
numbering plan with many coincidences with the previous codes.
2. Once a digit value is changed, the feature codes starting with this digit, starts
with the new value of the digit. The same is valid for the feature codes dialed
after “#”.
3. The substitutes are not valid for the codes, which are dialed while receiving busy
tone and overflow tone and during ongoing conversations.
(E.g. Even if 0 is changed to another digit, the users still activate Intrusion facility
by dialing 0.)
4. If “8” is accidentally cleared by dialing this code before a new code is assigned
for “8”, or if you forget the new access code for “8”, the system will reject every
code (including the program codes) beginning with 8. In that case (provided that
a KAREL Console or Feature Phone is used):
Press “8” until “88” is seen on the display of the telephone, dial “77777” to enter
the Programming Mode, press “8” once more until “88” is seen on the display of
the telephone and then dial “869” to restart Flexible Numbering.
