MS48IP Programming Guide
73
Notes
1. P can be 1, 2, 3 or 4 digits.
If P is less than 4 digits, then you have to hang up after dialing P to complete
the entry of the program.
2. If P coincides with any existing code, error tone is received after entering the
program. Then the existing code has to be cleared or changed first to be able
to allocate this code to another feature.
3. If the entry of the program results with an error tone, the coinciding number will
be seen on the telephone set provided that a KAREL Console or Feature
Phone is used.
4. Even after changing a feature code, the old code can be used, as well.
Clearing Extension Access Codes:
This program clears all extension numbers.
8 8 6 8
Notes
If a new numbering plan coincides with the previous or the default ones at too many
points, then it may be too cumbersome to enter the new plan by the code 886 A E,
so all extension and line numbers are cleared through the code 8868. Then it will be
necessary to enter new access codes for extensions and lines all over again. If the
number of any extension is not entered after dialing that code, then one cannot
access that extension.
Resetting The Flexible Numbering:
This program resets the flexible numbering and the factory set access codes are
assigned to extensions and features.
8 8 6 7
