MS48IP Programming Guide
65
Defining IP Address:
Extension numbers of the IP extensions that will be defined in the system are
matched with the IP addressees of them by using this program.
Example; If we suppose that the IP extension numbers are defined between 174
and 151 by the programmer; IP extensions numbered between 174 and 151 should
be matched with the IP addresses of these IP extensions.
8 7 7 6 6 5 1 S M P
Parameters
S
:
IP extension number
M
:
0
Static IP Mode
:
1
Dynamic IP Mode
P
:
IP number (in NNN#NNN#NNN#NNN* format)
Notes
1. Example: 8776 6 51 155 192#168#23#2* is dialed to set the IP number as
‘192.168.23.2’ for the IP extension numbered 155.
2. For S parameter, the number used while the IP extension is assigned into the
system must be entered.
3. While M=0, the entered IP address is compared with the IP address of the
extension sent during registration. If the numbers are different, extension’s
connection request is rejected.
4. While M=1, the IP number is not checked during registration and the sent IP
address of the extension is recorded as the current IP number. If the M
parameter is selected as ’1’, P parameter is not entered (programming will be
completed by the * key, instead of entering P parameter).
