MS48IP Programming Guide
30
Hookswitch Flash Duration (Min/Max):
With this program the hook flash filter parameters can be adjusted. The parameters
L and H determine the minimum and the maximum durations that the extension
must press the hook switch in order to make hook-flash.
8 7 7 6 4 0 9 L H
Parameters:
L
: 01 – 98
Minimum Flash Duration = L x 20 msec
H
: 02 - 99
Maksimum Flash Duration = H x 20 msec
Default Value:
L= 04 (80 msec) and H= 37 (740 msec).
Notes:
1. Dialing 8776 4 09* sets the indexes as their default values.
2. For example, if the default values of Min and Max are set, the extension must
hold the hook switch on more than 80 ms and less than 740 ms. If the on-hook
duration is less than 80 ms, the sistem may detect a DP digit 1 or if it is more
than 740 ms, the system detects on-hook.
This program will be supported with the Net-Console release AAS.
Ring Detection Filter:
The rings shorter than the filter time (msec.) are not perceived by the system. With
this program filter time can be programmed between 100 and 5000 miliseconds.
8 7 7 6 4 1 0 R
Parameters:
R
: 01 - 50
Detectable ring time = R x 100 msec
Default Value:
The default values may vary according to the country codes.
Notes:
1. If the R parameter is defined as 400 msec., the system can not perceive the
rings shorter than 400 msec. But it perceives the rings longer than 400 msec.
2. This program will be supported with the Net-Console release AAS.
