MS48IP Programming Guide
55
Call Time-Out For Lines:
With this program, the duration limitation can be defined for a specific line. This way
the line can be controlled in terms of duration.
8 9 9 D [9 ] F
Parameters:
D
:
The line access code
F
:
01-89
Conversation time-out duration in minutes
00
No duration limit
Notes:
1. The line is automatically dropped at the end of the defined period if the time out
duration is programmed through the 899-coded program for the calls with
dialling 9, by selective line access, with the 799, 797 and 790-coded programs
and auto-dialling through common&private pools.
2. If the time-out duration is programmed through this program, whenever the
defined line is taken and then the conversation is established, the line is
automatically dropped at the end of the period F.
3. The extension who takes the defined line is warned by a short tone 15 seconds
prior to termination of the conversation.
4. The incoming calls through the related line are not affected from this defined
time-out duration.
5. When “polarity reversal detection” and “call time-out” programs are defined for
analog lines both of them work properly at the same time.
