MS48IP Programming Guide
26
DTMF Generation Mode Exit Duration:
With this program, when the system regenerates the numbers dialled by the
extensions and sends the regenerated DTMF digits to the line (if LCR is activated or
the code “8088 1 is entered) the duration to exit from the DTMF generation mode
can be programmed.
8 7 7 6 4 0 3 P
Parameters:
P
: 1-9
Exit Duration From DTMF Generation Mode
Default Value:
F = 4 seconds
Notes:
1. Dialing 8776 4 03 * sets the DTMF Generation Mode Exit Duration as its
default value.
2. The system sends the regenerated numbers until the end of the defined
duration that is programmed by this code. If the extension still continues to dial
the numbers within the defined duration, those digits will directly be sent to
C.O. without being regenerated by the system.
