MS48IP Programming Guide
20
Notes
1. If the prefix Y is less than 2 digits, then skip the rest of the digits by dialing “#” in
place of each digit.
2. If the prefix P is less than 6 digits, then skip the rest of the digits by dialing “#” in
place of each digit. If the prefix R is less than 6 digits, then skip the rest of the
digits by dialing “#” in place of each digit.
3. If the telephone is hanged up after 8006 L is dialed the relevant line of LCR is
cleared.
4. The parameter “Y” is used when the same external party number is wanted to
be dialled in different ways. By this definition extensions on the system can use
different routes to make their callings. With this distinguishing prefix, some
reasonable codes can be defined to point out the routes, before the extensions
dial the desired external number. Please notice that this distinctive codes are
just required to decide the route, they are not sent to the line.
Example: When the following codes are entered:
1)
8006 01 ## 0##### ###### 01 *
2)
8006 02 9# 0##### ###### 02 * (Y=9)
3)
8006 03 99 0##### ###### 03 * (Y=99)
-
If the extension dials "9 0 555 666 77 88" and waits, the system sends
the number "0 555 666 77 88" to the CO through the Line 01 according to the
LCR Line 1.
-
If the extension dials "9 9 0 555 666 77 88" and waits, the system sends
the number "0 555 666 77 88" to the CO through the Line 02 according to the
LCR Line 2.
-
If the extension dials "9 9 9 0 555 666 77 88" and waits, the system sends
the number "0 555 666 77 88" to the CO through the Line 03 according to the
LCR Line 3.
5. Whenever the extension gives a break of 3 seconds while dialing the digits:
The system compares the whole dialed number with prefix P of each location in
the table. If it finds a match, the digits are dialed according to the matching
location.
If it does not find a match, it omits the last dialed digit and checks the remaining
dialed number. The system repeats this procedure until the first dialed digit to
find a match.
If it does not find a match even after checking down to the first dialed digit, it
does not give a line to the extension. Instead, the system waits the extension to
dial up to the 6th digit.
E.g. when the following codes are entered:
8006 01 4##### 09#### *
8006 02 42#### 0532## *
