MS48IP Programming Guide
40
“*”, “#” Keys / Hook Flash Authority:
This program controls whether extensions use the keys “*”/ “#” and make hook
flash.
8 0 7 1 A [ 9 ] P T
Parameters
A
:
The extension access code
P
:
0
Extension cannot use “*” / “#” keys
:
1
Extension can use “*” / “#” keys
T
:
0
Extension cannot make hook flash
:
1
Extension can make hook flash
Default Value
P = 1, T = 1 for all extensions.
Notes
1. For cases when “*” / “#” keys have to be used to take advantage of various CO
exchange features that the system is connected to, or if it is not desired that an
extension transfers calls by her/his telephone’s on/off switch then this program
should be utilized.
2. The number of the DTMF receiver channels on a system is limited such that
they cannot serve all the extensions at the same time. Since one MF receiver
per extension, whose P parameter has been set as 1, is allocated throughout
the conversation, the number of extensions in the system with parameter P has
been defined as 1 should be determined by considering that situation and traffic
load in the overall system.
3. Usage of the parameter P affects only extensions with DTMF telephone set.
4. When the LCR is activated on the system, an extension who is programmed by
the 8071-coded program as not to use “*” / “#” keys, can use “*” / “#” keys on the
line to be able to perform some facilities which are supported by C.O.
