172
Kaspersky Anti-Virus 7.0
You can only create a rescue disk under
Microsoft Windows XP or Microsoft
Windows Vista. The rescue disk feature is not available under other supported
operating systems, including Microsoft Windows XP Professional x64 Edition and
Microsoft Windows Vista x64.
15.4.1.
Creating a rescue disk
Warning! You will need the Microsoft Windows XP Service Pack 2 installation
disk to create a rescue disk.
You need the program
PE Builder
to create the Rescue Disk.
You must install PE Builder on your computer beforehand to create disk with it.
A special Wizard walks you through the creation of a rescue disk. It consists of a
series of windows/steps which you can navigate using the
Back
and
Next
but-
tons. You can complete the Wizard by clicking
Finished
. The
Cancel
button will
stop the Wizard at any point.
Step 1. Getting ready to write the disk
To create a rescue disk, specify the path to the following folders:
PE Builder program folder
Folder where rescue disk files will be saved before burning the CD/DVD
If you are not creating a disk for the first time, this folder will already
contain a set of files made the last time. To use files saved previously,
check the corresponding box.
Please note that an earlier version of rescue disk files contains an old
version of application databases. To optimize virus scans and system
recovery, it is recommended that databases be updated and a new res-
cue disk created.
The Microsoft Windows XP Service Pack 2 installation CD
After entering the paths to the folders required, click
Next
. PE Builder
will start up and the rescue disk creation process will begin. Wait until
the process is complete. This could take several minutes.
