JVL MAC00-EC4 User Manual Download Page 251

Page: 251 / 300

JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors

251

10.3

Setting up MacTalk for Ethernet

Step 8.

In the list presented we have added a motor with the IP/address 192.168.0.56. This mo-

tor is stepper motor so we name it “Stepper_x” to be easy recognizable. We also have

a MAC140 motor in the network, for this motor we have assigned the name M140.

The list is added to the address bar which automatically suggest the motor when we type

in the first letters of the name. The motor can also be selected directly in the list. Please

note that both the IP address and the name is added to the list and saved. The list is load-

ed automatically when MacTalk is started.

Step 9.

Add a name to the list in the field next to the IP address and press “Ok”, Now the list is

saved. The name entered can now be used to access the motor on the network. The

complete list can be cleared by pressing “Clear list” or a single enty can be deleted by

pressing “Delete”.

When MacTalk is started this list is read and added to the address bar selections, so that

either the name or the IP address can be selected.

TT3079-01GB

The Address\naming -list can be

shown anytime by pressing this button.

To make a quick select in the
names or IP addresses, click here.

Summary of Contents for MAC00-EC4













































































































































































































































































































Search results

Summary of Contents for MAC00-EC4

Reviews:

Brands by name

Popular brands

JVL MAC00-EC4, User Manual

Search results

Summary of Contents for MAC00-EC4

Reviews:

Brands by name

Popular brands