TaxLine IP Installation & User Guide
7
2.
INSTALLATION GUIDE
The unit incorporates a step by step installation program which enables a standard
operation of the unit to be programmed. However, all the configuration options may
later be accessed by using the programming menu.
2.1.
CONNECTING THE UNIT
TaxLine IP may receive CDR from the PBX in 2 different ways:
Via a TCP/IP connection
Via the V24 (RS-232) port of the PBX
1.
Connection to the PBX via RS-232
Use the supplied cable to hook up the V24 connector of your PBX to the 9 pin
connector labeled
PABX which is located on the unit’s rear panel or prepare a cable
to fit your needs.
Below you will find the configuration of the unit’s 9 pin connector. The V24 connector
configuration will of course depend on the exact model of your PBX:
TaxLine IP
9 pins connector
PBX
RXD (2)
TXD (3)
DTR (4)
GND (5)
TXD
RXD
RTS
GND
