TaxLine IP Installation & User Guide
34
If the PBX has an interactivity protocol, the Booths or Clients extension status may
be modified after the Check-in and Check-out operations.
The default status after a Check-in of the Booths or Clients extensions are
determined by the following parameters.
Status:
Locked or unlocked. This is the initial status of an extension after a
check-in operation. Enter the default value for the check-in status.
This parameter only makes sense in the case that the unit is
interactive with the PBX through a V24 port.
Credit Limit:
Maximum amount authorised by default for each extension. This
limit is generally for indicative purposes only. Exceeding the limit
only blocks the extension in the case of a PABX interactive Check-
in/Check-out.
Check-in:
This is the Auto check-in parameter. If its value is YES, each time
an extension is checked-out, the same extension is automatically
checked-in. If the value is NO the extension must be manually
checked-in on arrival of the next guest.
DCC Param.:
Parameter for the system´s use.
8.
Printer Configuration
...
...
3. Configuration
…
…
5. Printer
6. Bills
1.Printer
2.Port
Serial
3.Compressed seq.
4.Normal
Seq.
5.Initial
Seq.
6.Final
Seq.
7.Flow
Control
8.Line Feeds
Printer
. Select the printer. After specific selections, TaxLine IP will reboot. Each
printer is associated with a specific configuration of the following parameters.
Serial Port
. Programming of the serial port for communication with the printer.
Compressed Sequence
. In order for the printer to use a compressed Font.
Normal Font
. In order for the printer to use a normal Font.
Initial Sequence
. In order to define an initial sequence for the printer programming.
Final Sequence
. In order to establish a programming sequence for the end of the
ticket (example: cut paper, open cash drawer, etc.)
Flow Control
. To activate/desactivate the flow control for the data transfer between
the unit and the printer.
This feature depends on the printer model, and it may be necessary to deactivate
it for a proper operation.
Line Feeds
. To define the number of line feeds after each report or bill.
To modify sequences, check the printer manual. Sequences are entered as decimal
numbers separated by blank spaces. For example: 27 33 1->Compressed sequence.
