Juniper JUNOSE 11.2, Configuration Manual

Page: 634 / 772

•
Field descriptions
•
Type—Interface type
•
Total—Total number of interfaces on this column
•
Static—Number of static interfaces on this column
•
Dynamic—Number of dynamic interfaces on this column
•
Example
host# show columns
Interface columns:
------------------
Type Total Static Dynamic
-------------------- ---------- ---------- ----------
Bridged Ethernet 4 2 2
IP over ATM 4 2 2
PPP 22 12 10
PPPoE 10 5 5
•
See show columns.
show pppoe interface
•
Use to display summary information about the encapsulation type lockout parameters
configured for PPPoE clients on a dynamic PPPoE subinterface column.
•
The following field descriptions and example include only the portion of the show
pppoe interface command display relevant to lockout configuration for PPPoE clients.
For more information about using this command, see “show pppoe interface” on page 421
in “Configuring Point-to-Point Protocol over Ethernet” on page 371.
•
Field descriptions
•
Lockout Configuration (seconds)—Encapsulation type lockout settings for the PPPoE
client associated with the dynamic PPPoE subinterface column
•
Min—Minimum lockout time, in seconds
•
Max—Maximum lockout time, in seconds
•
Total clients in active lockouts—Number of PPPoE clients currently undergoing
dynamic encapsulation type lockout
•
Total clients in lockout grace period—Number of PPPoE clients currently in a
lockout grace period; for more information about the lockout grace period, see
“Guidelines for Configuring Encapsulation Type Lockout for PPPoE sessions” on
page 523
•
Example
host1# show pppoe interface atm 3/0.101
. . .
Lockout Configuration (seconds): Min 5, Max 60
Total clients in active lockouts: 0
Total clients in lockout grace period: 0
Copyright © 2010, Juniper Networks, Inc. 602
JunosE 11.2.x Link Layer Configuration Guide