Juniper JUNOSE 11.2, Configuration Manual

Page: 522 / 772

•
Use to remove all dynamic MAC address entries for a network interface belonging to
a bridge group from the forwarding table for that bridge group.
•
You must specify the following:
•
interfaceType —One of the following bridge interface types listed in Interface Types
and Specifiers in JunosE Command Reference Guide :
•
atm
•
fastEthernet
•
gigabitEthernet
•
tenGigabitEthernet
•
interfaceSpecifier —Particular interface; format varies according to interface type;
see Interface Types and Specifiers in JunosE Command Reference Guide for
information
•
Example
host1# show bridge westford02 table dynamic
Bridge: westford02 MAC Address Table
Address Action Interface Age
-------------- ---------- ------------------- -----
0090.1a01.0205 forward ATM3/3.1 0
0090.1a01.0206 forward ATM3/3.2 10
0090.1a01.0207 forward ATM3/3.3 5
host1# clear bridge interface atm 3/3.2
host1# show bridge westford02 table dynamic
Bridge: westford02 MAC Address Table
Address Action Interface Age
-------------- ---------- ------------------- -----
0090.1a01.0205 forward ATM3/3.1 0
0090.1a01.0207 forward ATM3/3.3 5
•
There is no no version.
•
See clear bridge interface.
Monitoring Bridge Groups
You can use show commands to display information about the bridge groups configured
on your router.
show bridge
•
Use to display configuration and statistics information for the specified bridge group.
•
To display information about the MAC address table and bridge interfaces, use the all
keyword.
•
Field descriptions
Copyright © 2010, Juniper Networks, Inc. 490
JunosE 11.2.x Link Layer Configuration Guide