Juniper JUNOSE 11.2, Configuration Manual

Page: 316 / 772

administratively disabled (closed), which means that the ppp shutdown command
is operational
•
Configured network protocol—Indicates the network protocol configured on the
interface
•
Baseline status—Indicates whether a statistics baseline is set
•
Interface statistics
•
packets—Number of packets received (in) or transmitted (out) on the interface
•
octets—Number of octets received (in) or transmitted (out) on the interface
•
errors—Number of errors received (in) or transmitted (out) on the interface
•
discards—Number of packets discarded on receipt (in) or discarded before they
were transmitted (out); for more information about the discards counter, see “Rate
Limiting for PPP Control Packets” on page 263
•
policed—Number of packets received (in) and marked as per the rates configured
for the interface; for more information, see “Rate Limiting for PPP Control Packets”
on page 263
•
IPCP protocol configuration
•
configured—IPCP is configured on this interface (true or false)
•
administrative-status—IPCP administrative status (open or closed)
•
ip-address—Address to be used for negotiation of the local IP address option
•
dns-precedence—Used to resolve conflicts during negotiation of DNS addresses;
“local” indicates that the local side takes precedence and the
no ppp peer dns
command is operative; “peer” indicates that the remote side takes precedence
and the
ppp peer dns command is operative
•
wins-precedence—Used to resolve conflicts during negotiation of WINS addresses;
“local” indicates that the local side takes precedence and the
no ppp peer wins
command is operative; “peer” indicates that the remote side takes precedence
and the
ppp peer wins command is operative
•
ipcp-netmask-option—Controls negotiation of the IPCP netmask option; disabled
= do not negotiate, enabled = negotiate
•
ipcp-lockout-option—Terminates an invalid subscriber entry and prevents
additional IPCP negotiations (enabled or disabled)
•
max-negotiations—Maximum number of renegotiation attempts that the router
accepts before terminating a PPP session
•
ipcp prompt-option dns—Prompts the CPE (Customer Premises Equipment) to
negotiate the IPCP primary and secondary DNS options that are locally available
with the broadband remote access server (enabled or disabled)
Copyright © 2010, Juniper Networks, Inc. 284
JunosE 11.2.x Link Layer Configuration Guide