manualshive.com logo in svg

Juniper JUNOSE 11.2, Configuration Manual

"Juniper JUNOSE 11.2 Configuration Manual - Download this comprehensive and user-friendly manual for free from our website. Explore step-by-step instructions, detailed configurations, and troubleshooting tips to maximize the potential of your Juniper JUNOSE 11.2 product. Upgrade your knowledge effortlessly and efficiently with our downloadable manual."

Share
Download
background image

Overriding Base Profile Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . 629
Changing VC Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 630
Static ATM Interfaces Within VC Subranges . . . . . . . . . . . . . . . . . . . . . 630
Terminating Stale PPPoA Subscribers and Restarting LCP

Negotiations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 631

Authenticating Subscribers on Dynamic Bridged Ethernet over Dynamic

ATM Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 632

Configuring a Dynamic ATM 1483 Subinterface . . . . . . . . . . . . . . . . . . . . . . 633
Configuring Overriding Profile Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . 641

Assigning an Overriding Profile to an ATM PVC . . . . . . . . . . . . . . . . . . . 642
Removing an Overriding Profile Assignment from an ATM PVC . . . . . . 643
Removing Overriding Profile Assignments from a VC Range or

VC Subrange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 644

Changing VC Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 646

Adding VC Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 646
Removing VC Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 647
Modifying VC Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 647
Merging VC Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 648
Changing the Administrative State of VC Subranges . . . . . . . . . . . . . . 648

Configuring Static ATM Interfaces Within VC Subranges . . . . . . . . . . . . . . . 650

Creating Static ATM Interfaces Within VC Subranges . . . . . . . . . . . . . . 651
Creating VC Subranges That Include Static ATM Interfaces . . . . . . . . . . 651

Configuring VLAN Dynamic Subinterfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 653

About Configuring Dynamic VLAN Subinterfaces . . . . . . . . . . . . . . . . . . . . . 654

Overview and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 654
VLAN Base Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 655
Nested Profile Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656
Additional Profile Characteristics for Upper Interfaces . . . . . . . . . . . . . 657
Bulk Configuration of VLAN Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657
Bulk Configuration of VLAN Ranges Using Agent-Circuit-Identifier

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 658

Dynamic Interface Creation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 659
Overriding Base Profile Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . 660
Changing VLAN Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 660
Static VLAN Subinterfaces Within VLAN Subranges . . . . . . . . . . . . . . 660

Configuring a Dynamic VLAN Subinterface . . . . . . . . . . . . . . . . . . . . . . . . . . 661
Configuring Dynamic VLAN Subinterfaces Based on Agent Circuit Identifier

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 663

Configuring Overriding Profile Assignments for VLAN Major Interfaces . . . 664

Removing an Overriding Profile Assignment from a VLAN . . . . . . . . . . 665
Removing Overriding Profile Assignments from a VLAN Range or VLAN

Subrange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 666

Changing VLAN Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 673

Adding VLAN Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 674
Removing VLAN Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 674
Modifying VLAN Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 675
Merging VLAN Subranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 676
Changing the Administrative State of VLAN Subranges . . . . . . . . . . . . 676

xxi

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for JUNOSE 11.2





































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.2

NEC NEAX 2000 IVS User Manual preview
NEAX 2000 IVS
Brand: NEC Pages: 81
Panasonic WJ-ND300 Administrator Console Operating Instructions Manual preview
WJ-ND300 Administrator Console
Brand: Panasonic Pages: 27
TAA Amanda User Manual preview
Amanda
Brand: TAA Pages: 28
Valcom VIP-102B Configuration Manual preview
VIP-102B
Brand: Valcom Pages: 5
Canon PowerShot A590 IS Software User'S Manual preview
PowerShot A590 IS
Brand: Canon Pages: 49
MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Brand: MACROMEDIA Pages: 72
Quantum GoVault 40GB User Manual preview
GoVault 40GB
Brand: Quantum Pages: 91
Omron FLEXXPECT-PHARMA Brochure preview
FLEXXPECT-PHARMA
Brand: Omron Pages: 2
Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual preview
ExtremeWare Enterprise Manager
Brand: Extreme Networks Pages: 264
Altigen MaxACD Administrator Manual preview
MaxACD Administrator
Brand: Altigen Pages: 261
Casio EMULATOR FX-ES User Manual preview
EMULATOR FX-ES
Brand: Casio Pages: 18
AVG ANTI-VIRUS 2011 - REV 2011.03 User Manual preview
ANTI-VIRUS 2011 - REV 2011.03
Brand: AVG Pages: 211
FujiFilm FinePixViewer Release Note preview
FinePixViewer
Brand: FujiFilm Pages: 3
Intel B75TM-ITX Overview preview
B75TM-ITX
Brand: Intel Pages: 19
GRASS VALLEY KAYAK HD-SD Datasheet preview
KAYAK HD-SD
Brand: GRASS VALLEY Pages: 8
GRASS VALLEY K2 FCP CONNECT - Release Note preview
K2 FCP CONNECT -
Brand: GRASS VALLEY Pages: 19
Bai cells EG7035 User Manual preview
EG7035
Brand: Bai cells Pages: 24
Ableton Live Reference Manual preview
Live
Brand: Ableton Pages: 535

Brands by name

Popular brands

Load more brands