Juniper JUNOSE 11.2, Configuration Manual

Page: 154 / 772

•
status—One of the following states:
•
Up—Traffic can flow on the interface
•
Offline—Traffic cannot flow because hardware is unavailable
•
Down—Traffic cannot flow because of a problem in the interface at the current
protocol layer
•
LowerLayerDown—Traffic cannot flow because of a problem in an interface at a
lower protocol layer
•
AdministrativelyDown—Traffic cannot flow because of manual administrative
intervention
•
Description—Text description or alias if configured for the interface
•
In bytes—Number of inbound bytes received on the interface
•
Out bytes — Number of outbound bytes transmitted on the interface
•
In frames—Number of inbound frames received on the interface
•
Out frames—Number of outbound frames transmitted on the interface
•
In errors—Number of inbound errors received on the interface
•
Out errors — Number of outbound errors transmitted on the interface
•
In discards—Number of inbound packets discarded
•
Out discards — Number of outbound packets discarded
•
In unknown protos—Number of packets received on the interface with unknown
protocols
•
Time since last status change—Time since the last status change on the interface
•
Example
host1# show frame-relay interface
Frame relay interface 3/2:1/1, status is up
Description: boston01
Time since last status change 01:21:10
In bytes: 19712 Out bytes: 60918
In frames: 1232 Out frames: 1232
In errors: 0 Out errors: 0
In discards: 0 Out discards: 0
In unknown protos: 0
Frame relay interface 3/2:2/1, status is up
Description: newyork02
Time since last status change 03:06:18
In bytes: 19728 Out bytes: 60702
In frames: 1233 Out frames: 1233
In errors: 0 Out errors: 0
In discards: 0 Out discards: 0
In unknown protos: 0
Frame relay interface 3/2:3/1, status is up
Copyright © 2010, Juniper Networks, Inc. 122
JunosE 11.2.x Link Layer Configuration Guide