Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 396 / 742

Table 81: show mpls rsvp Output Fields (continued)
Field Description Field Name
Next hop address m_ipNextHopAddr
Type of next hop (loose, strict, session) NextHop
RSVP session label range LabelRange
Traffic parameters for the sender SenderTSpec
Sender's description of generated traffic, in kbps Token Bucket Rate
Sender's description of generated traffic, in kbps Token Bucket Size
Lender's peak traffic generation rate Peak Data Rate
Minimum packet size generated by sender Min Policed Unit
Maximum packet size generated by sender Max Packet Size
Record route object RRO
Indicates presence of this QoS object ADSPEC
Incoming explicit route object IN ERO
Outgoing explicit route object OUT ERO
RSVP session attributes SES ATTR
Setup priority of tunnel Setup Pri
Hold priority of tunnel Hold Pri
Name of the tunnel name
One or more of the IngressReRoute (the ingress router can reroute
the LSP), Local Protection (routers can use local repair mechanism
to fix the LSP; this fix might violate the explicit route object
associated with the LSP), and MergingPermitted (LSPs can be
merged) flags Flags
Indicates presence of the traffic trunk classifier object TTC
Indicates presence of the policy object Policy Object
Indicates presence objects not defined by the RSVP specification Unknown Objects
PSB in use PSB Flag InUse
Copyright © 2010, Juniper Networks, Inc. 360
JunosE 11.2.x BGP and MPLS Configuration Guide