Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 670 / 742

Table 131: show vpls connections Output Fields
Field Description Field Name
Name of the VPLS instance for which information is displayed BridgeGroup
Bridging capability currently enabled; for a VPLS instance, this field
always displays default Bridge Mode
Length of time, in seconds, that a MAC address entry can remain in
the forwarding table before expiring Aging Time
Whether acquisition of dynamically learned MAC addresses is
enabled or disabled Learning
Maximum number of dynamic MAC addresses that the VPLS
instance can learn Max Learn
Whether SNMP link status processing is enabled or disabled Link Status Snmp Traps
Name of the subscriber policy currently in effect Subscriber Policy
Number of ports currently configured for the VPLS instance,
including network interfaces and the VPLS virtual core interface Port Count
Number of network interfaces currently configured for the VPLS
instance Interface Count
Name of the transport virtual router configured for the VPLS instance Transport Virtual Rtr
Unique route distinguisher configured for the VPLS instance Route Distinguisher
Site name configured for the VPLS instance SiteName
Identifier for the PE router that acts as the transport virtual router
for the VPLS instance Transport Virtual Rtr
Priority of the VPLS instance to serve as the backup PE router for
the CE device in the event of a network failure in the multihomed
configuration; indicates also that the site is multihomed Multihomed priority
Numerical site identifier configured for the VPLS instance SiteId
Maximum number of sites that can
participate in the VPLS domain associated with the VPLS instance
SiteRange
Extended community identifiers, also known as route targets, for
each VPLS instance configured on the router VPLS Route Targets
Copyright © 2010, Juniper Networks, Inc. 634
JunosE 11.2.x BGP and MPLS Configuration Guide