Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 709 / 742

Table 139: show l2vpn connections Output Fields (continued)
Field Description Field Name
Local customer site ID configured on the layer 2 interface Local-Site-Id
Remote customer site ID configured on the layer 2 interface Remote-Site-Id
Related Topics show l2vpn connections
•
Monitoring VPWS Instances
Purpose To display configuration and status information for VPWS instances configured on the
router. You can display information for all VPWS instances or information about a
particular VPWS instance. The
detail keyword displays detailed information about the
specified VPWS instance or all VPWS instances.
Action To display information about all VPWS instances configured on the router:
host1# show l2vpn all
L2VPN: l2vpn1
Encapsulation Type Ethernet
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name boston Site Id 1
Route Targets:
Route Target: RT:100:1 both
L2VPN: l2vpn2
Encapsulation Type ATM AAL5 SDU VCC transport
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:12
Site Range 20
Sites:
Site Name westford Site Id 1
Site Name boston Site Id 3
Route Targets:
Route Target: RT:100:2 both
To display detailed information about all VPWS instances configured on the router:
host1# show l2vpn instance all detail
L2VPN: l2vpn1
Encapsulation Type Ethernet
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name boston Site Id 1
Route Targets:
Route Target: RT:100:1 both
673 Copyright © 2010, Juniper Networks, Inc.
Chapter 16: Monitoring VPWS