Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 203 / 742

Table 25: show ip bgp Output Fields (continued)
Field Description Field Name
Community number associated with the route Communities
Routes that have gone stale due to peer restart Stale
Number of unicast routes in the BGP routing table that have been
inserted into the IP routing table that are also available for use in
the multicast view of the IP routing table unicast/multicast routes
selected for route table
installation
Number of unicast and multicast routes in the BGP routing table
that have been inserted into the IP routing table that are also
available for use in the IP tunnel routing table unicast/multicast
tunnel-usable routes
selected for route table
installation
Number of routes in the BGP routing table that have been inserted
into the IP tunnel routing table tunnel-only routes selected
for tunnel-route table
installation
Number of distinct path attributes stored in BGP's internal path
attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in
its internal path attribute table and share it between the two routes
to conserve memory. path attribute entries
Timestamp indicating when the statistics baseline was last set Statistics baseline set
Indicates whether network-route filtering is enabled Route-map
Indicates whether an IGP backdoor route is favored over an EBGP
route Backdoor
Calculated preference CalPrf
Related Topics show bgp ipv6
•
•
show ip bgp
Monitoring Advertised BGP Routes
Purpose Display the routes in the specified neighbor’s or peer group’s Adj-RIBs-Out table for IPv4
or IPv6.
For peers, display the attributes associated with the route before the application of any
outbound policy. For peer groups, display the attributes associated with the route after
the application of any outbound policy; that is, the actual advertised attributes. Report
whether the indirect next hop of a route is unreachable; if not, display the IGP cost to the
indirect next hop.
167 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Monitoring BGP