Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 197 / 742

Table 23: show ip bgp Output Fields (continued)
Field Description Field Name
Prefix for the routing table entry Prefix
Peer from which route was learned Peer
IP address of the next router that is used when a packet is forwarded
to the destination network Next hop IP address
Multiexit discriminator for the route MED
Local preference for the route LocPrf
Weight of the route Weight
Origin of the route Origin
AS path through which this route has been advertised AS path
Community number associated with the route Communities
Routes that have gone stale due to peer restart Stale
Number of unicast routes in the BGP routing table that have been
inserted into the IP routing table that are also available for use in
the multicast view of the IP routing table unicast/multicast routes
selected for route table
installation
Number of unicast and multicast routes in the BGP routing table
that have been inserted into the IP routing table that are also
available for use in the IP tunnel routing table unicast/multicast
tunnel-usable routes
selected for route table
installation
Number of routes in the BGP routing table that have been inserted
into the IP tunnel routing table tunnel-only routes selected
for tunnel-route table
installation
Number of distinct path attributes stored in BGP's internal path
attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in
its internal path attribute table and share it between the two routes
to conserve memory. path attribute entries
Timestamp indicating when the statistics baseline was last set Statistics baseline set
Related Topics Monitoring the BGP Routing Table on page 162
•
•
default-fields route
161 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Monitoring BGP