Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 398 / 742

Table 81: show mpls rsvp Output Fields (continued)
Field Description Field Name
Reservation refresh triggered RSB Flag IsPathTrigger
RSVP session destination address Destination
Number representing the RSVP session tunnel ID TunnelId
IP address representing the RSVP session extended tunnel ID Extended Tunnel Id
Related Topics show mpls rsvp
•
Monitoring RSVP MD5 Authentication
Purpose Display information about RSVP MD5 authentication.
Action To display information about RSVP MD5 authentication:
host1# show mpls rsvp authentication
Mpls interface FastEthernet2/4
RSVP Authentication Secure Association with peer 10.2.2.2
Receive Sequence Number 4592798942692985943
RSVP Authentication Secure Association with peer 10.3.3.3
Receive Sequence Number 4592798942692912623
Mpls interface ATM6/0.2
RSVP Authentication Secure Association with peer 102.2.2.2
Receive Sequence Number 4592798942692985934
Mpls interface ATM6/0.3
RSVP Authentication Secure Association with peer 10.2.2.2
Receive Sequence Number 4592798942692985956
Meaning Table 82 on page 362 lists the show mpls rsvp authentication command output fields.
Table 82: show mpls rsvp authentication Output Fields
Field Description Field Name
IP address of a peer with which the router has a security association RSVP Authentication
Secure Association with
peer
Sequence number of first authenticated packet from peer;
subsequent packets from the peer must be greater than this base
number Receive Sequence Number
Related Topics show mpls rsvp authentication
•
Monitoring RSVP-TE Interfaces Where BFD is Enabled
Purpose Display information about RSVP-TE major interfaces on which BFD is enabled.
Copyright © 2010, Juniper Networks, Inc. 362
JunosE 11.2.x BGP and MPLS Configuration Guide