Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 382 / 742

1: next-address 70.70.70.2
2: next-address 30.30.30.1
not referenced by any options
path name/identifier rx1-path2 enabled
1: next-address 60.60.60.2
2: next-address 40.40.40.1
not referenced by any options
To display information about the MPLS explicit path named rx1-path2:
host1:pe2# show mpls explicit-paths name rx1-path2
path name/identifier rx1-path2 enabled
1: next-address 60.60.60.2
2: next-address 40.40.40.1
not referenced by any options
Meaning Table 73 on page 346 lists the show mpls explicit-paths command output fields.
Table 73: show mpls explicit-paths Output Fields
Field Description Field Name
Name or identifier of explicit path and status, enabled or disabled,
followed by list of path links and the IP address for each link’s next
address path name/identifier
Related Topics show mpls explicit-paths
•
Monitoring the RSVP-TE Bypass Tunnels
Purpose Display information about the backup status of primary LSPs protected with bypass
tunnels.
Action To display the backup status of protected primary LSPs on a core router:
host1(config-if)# show mpls fast-reroute database
OutIntf Backup
Role Name / Label BackupIntf / Label Status
---- --------------- ------------- ---------------------- -----------
Core LSP 10.1.1.1:6 ATM4/0.2 / 21 tun mpls:bypass23 / 21 Established
Core LSP 10.1.1.1:7 ATM4/0.2 / 26 tun mpls:bypass23 / 26 Established
Example on a tunnel ingress router
OutIntf Backup
Role Name / Label BackupIntf / Label Status
---- ---- ------------- ---------------------- -----------
Head 1 ATM4/0.1 / 27 tun mpls:bypass12 / 27 Established
Head p2 ATM4/0.1 / 21 tun mpls:bypass12 / 21 Established
Meaning Table 74 on page 346 lists the show mpls fast-reroute command output fields.
Table 74: show mpls fast-reroute Output Fields
Field Description Field Name
Role of the router in the LSP: core, head, or tail Role
Name of the primary LSP Name
Copyright © 2010, Juniper Networks, Inc. 346
JunosE 11.2.x BGP and MPLS Configuration Guide