Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 378 / 742

Table 70: show ldp statistics Output Fields (continued)
Field Description Field Name
Number of no address events No address
Number of no interface events No interface
Number of no session events No session
Number of no adjacency events No adjacency
Number of unknown version events Unknown version
Number of malformed PDU events Malformed PDU
Number of malformed message events Malformed message
Number of unknown message type events Unknown message type
Number of inappropriate message events Inappropriate message
Number of inappropriate message events Malformed tlv
Number of bad TLV value events Bad TLV value
Number of missing TLV events Missing TLV
Number of PDU too large events PDU too large
Number of PDU too small events PDU too small
Number of no memory events No Memory
Related Topics show ldp statistics
•
Monitoring LDP Targeted Hello Receive and Send Lists
Purpose Display LDP targeted hello receive or send list, or both.
Action To display both the LDP targeted hello receive and send lists:
host1# show ldp targeted session
Mpls Target Session Status:
D = Dynamically, S = Statically, A = Access List Configured
Targeted session sent to 10.9.1.3 is up Used By: D
indirect nexthop index 3, resolved
Targeted session sent to 10.9.1.6 is up Used By: S
indirect nexthop index 206, resolved
Meaning Table 71 on page 343 lists the show ldp targeted session command output fields.
Copyright © 2010, Juniper Networks, Inc. 342
JunosE 11.2.x BGP and MPLS Configuration Guide