•
Framework for Pseudo Wire Emulation Edge-to-Edge
(PWE3)—draft-ietf-pwe3-arch-06.txt (April 2004 expiration)
•
IEEE 802.3ad (Link Aggregation)
•
Pseudowire Setup and Maintenance Using
LDP—draft-ietf-pwe3-control-protocol-08.txt (January 2005 expiration)
•
Requirements for Pseudo-Wire Emulation Edge-to-Edge
(PWE3)—draft-ietf-pwe3-requirements-08.txt (June 2004 expiration)
•
Transport of Layer 2 Frames Over MPLS—draft-martini-12circuit-trans-mpls-11.txt
(October 2003 expiration)
NOTE:
IETF drafts are valid for only 6 months from the date of issuance. They must be
considered as works in progress. Please refer to the IETF Web site at http://www.ietf.org
for the latest drafts.
For information about configuring supported layer 2 interfaces, consult the following
resources:
•
JunosE Physical Layer Configuration Guide
•
See
Configuring ATM
in
JunosE Link Layer Configuration Guide
.
•
See
Configuring Frame Relay
in
JunosE Link Layer Configuration Guide
.
•
See
Configuring Packet over SONET
in
JunosE Link Layer Configuration Guide
.
•
See
Configuring Bridged Ethernet
in
JunosE Link Layer Configuration Guide
.
For information about configuring supported serial interfaces, which are also referred to
as HDLC channels, see the following resources:
•
See
Configuring Channelized T3 Interfaces
in
JunosE Physical Layer Configuration Guide
.
•
See
Configuring T3 and E3 Interfaces
in
JunosE Physical Layer Configuration Guide
.
•
See
Configuring Channelized OCx/STMx Interfaces
in
JunosE Physical Layer Configuration
Guide
.
For information about configuring MPLS, see “Configuring MPLS” on page 275.
Related Topics
Layer 2 Services over MPLS Platform Considerations on page 510
•
•
Layer 2 Services over MPLS Overview on page 509
•
Layer 2 Services over MPLS Implementation on page 512
Layer 2 Services over MPLS Implementation
When layer 2 services are configured over MPLS, layer 2 traffic is encapsulated in MPLS
frames and sent over MPLS tunnels. A virtual circuit (VC) label that indicates a specific
Copyright © 2010, Juniper Networks, Inc.
512
JunosE 11.2.x BGP and MPLS Configuration Guide
Summary of Contents for JUNOSE 11.2.X BGP AND MPLS
