Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 58 / 742

Table 10: Behavior of Neighbor Commands
Category D:
Set
parameters
for a peer,
for a peer
group, or
globally
Category C:
Set parameters for a peer or
for a peer group
Category B:
Enable or
disable a
feature that
can be
configured
for a peer,
for a peer
group, or
globally
Category A:
Enable or disable a
feature that can be
configured for a peer or
for a peer group
•
neighbor
timers
•
neighbor
advertisement-interval
• neighbor allow
•
neighbor allowas-in
• neighbor description
•
neighbor distribute-list
• neighbor filter-list
•
neighbor graceful-restart
restart-time
• neighbor graceful-restart
stalepaths-time
•
neighbor local-as
• neighbor
maximum-orf-entries
•
neighbor maximum-prefix
• neighbor
maximum-update-size
•
neighbor password
• neighbor peer-group
•
neighbor peer-type
• neighbor prefix-list
•
neighbor prefix-tree
• neighbor remote-as
•
neighbor route-map
• neighbor send-label
•
neighbor site-of-origin
• neighbor unsuppress-map
•
neighbor update-source
• neighbor weight
•
neighbor
default-
originate
• neighbor
graceful-
restart
•
neighbor
rib-out
disable
• neighbor
shutdown
•
neighbor activate
• neighbor
advertise-map
•
neighbor as-override
• neighbor
bfd-liveness-detection
•
neighbor capability
• neighbor
ebgp-multihop
•
neighbor
ibgp-singlehop
• neighbor lenient
•
neighbor next-hop-self
• neighbor
next-hop-unchanged
•
neighbor passive
• neighbor
remove-private-as
•
neighbor
route-reflector-client
• neighbor
send-community
•
neighbor
soft-reconfiguration
inbound
Some of the commands in Table 10 on page 22 inherit global values set by other
commands. Table 11 on page 22 describes the relationship between these commands.
Table 11: Inheritance from Other Commands
Inherits Global Values Set By Category B Command
default-information originate neighbor default-originate
Copyright © 2010, Juniper Networks, Inc. 22
JunosE 11.2.x BGP and MPLS Configuration Guide