Juniper JUNOSE 11.2.X BGP AND MPLS, Configuration Manual

Page: 108 / 742

•
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# match as-path pathlist5
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match as-path.
match community
•
Use to match a community list.
•
Supported for inbound and outbound route maps.
•
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# match community comm5
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match community
match distance
•
Use to match any routes that have the specified administrative distance.
•
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# match distance 25
•
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
•
See match distance.
match extcommunity
•
Use to match an extended community list in a route map.
•
You can specify one or more extended community list names in a match clause. If you
specify more than one extended community list, the lists are logical ORed.
•
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# match extcommunity topeka10
•
Use the no version to remove the match clause from a route map or a specified value
from the match clause.
•
See match extcommunity.
match ip address
Copyright © 2010, Juniper Networks, Inc. 72
JunosE 11.2.x BGP and MPLS Configuration Guide