E 21
1003
.GB
5
Mechanical Back Up Steering (Emergency Steering Operation)
The mechanical back-up steering system is used to recover the truck in the event of
an electrical failure.
F
It must only be implemented by trained maintenance personnel who have been
trained to operate the truck.
– Turn off the main switch and the key
switch
– Ensure that the truck cannot roll away.
– Push the seat from the guide towards
the steering wheel.
– Disconnect fan connection
– Remove the cover above the seat by
removing three fixing screws.
– Release the magnetic brake
(see Chapter C).
– Remove the protective cover from the
centre bolt.
– Before recovering the truck the drive
wheel can be turned to the required
position via the centre bolt of the
steering motor by using a crank
handle.
– Assemble the crank handle (35) as indicated in the tool set table.
– Fit handle to steering drive and turn the drive wheel to the desired steering position.
o
Crank Handle Tool Set (35)
Item. Part
Order No.
Description
1
1
95 600 230
Box spanner 8 mm 1/2 " DIN 3120
2
1
95 608 130
Crank
3
1
27 636 010
Cardan joint
35
E 21
1003
.GB
5
Mechanical Back Up Steering (Emergency Steering Operation)
The mechanical back-up steering system is used to recover the truck in the event of
an electrical failure.
F
It must only be implemented by trained maintenance personnel who have been
trained to operate the truck.
– Turn off the main switch and the key
switch
– Ensure that the truck cannot roll away.
– Push the seat from the guide towards
the steering wheel.
– Disconnect fan connection
– Remove the cover above the seat by
removing three fixing screws.
– Release the magnetic brake
(see Chapter C).
– Remove the protective cover from the
centre bolt.
– Before recovering the truck the drive
wheel can be turned to the required
position via the centre bolt of the
steering motor by using a crank
handle.
– Assemble the crank handle (35) as indicated in the tool set table.
– Fit handle to steering drive and turn the drive wheel to the desired steering position.
o
Crank Handle Tool Set (35)
Item. Part
Order No.
Description
1
1
95 600 230
Box spanner 8 mm 1/2 " DIN 3120
2
1
95 608 130
Crank
3
1
27 636 010
Cardan joint
35
Summary of Contents for ETM/V 214
