Jungheinrich ETM/V 214, Operating Instructions Manual

Page: 92 / 97

F 9
1003
.GB
6.3 Removing the seat hood
– Pull seat locking lever (2) up and push seat (3) towards the steering wheel.
– Disconnect fan connection
– Slacken fixing screws (4) remove hood (5).
Z
Expose drive unit and hydraulic equipment for maintenance.
6.4 Checking the hydraulic oil level
– Prepare truck for maintenance and
repair work
(see Section 6.1 and 6.3).
– Check oil level in hydraulic tank.
Z
The oil level can be read from the
hydraulic tank with the load pickup
device fully lowered.
– If necessary top up the oil at the filler
neck (6) using oil of the right grade (for
hydraulic oil specification, see Section
5.1).
– Replace hood and secure with clamp
screws (4).
– Connect fan.
– Push seat into position and engage
locking lever (2).
3
5
4
2
6
F 9
1003
.GB
6.3 Removing the seat hood
– Pull seat locking lever (2) up and push seat (3) towards the steering wheel.
– Disconnect fan connection
– Slacken fixing screws (4) remove hood (5).
Z
Expose drive unit and hydraulic equipment for maintenance.
6.4 Checking the hydraulic oil level
– Prepare truck for maintenance and
repair work
(see Section 6.1 and 6.3).
– Check oil level in hydraulic tank.
Z
The oil level can be read from the
hydraulic tank with the load pickup
device fully lowered.
– If necessary top up the oil at the filler
neck (6) using oil of the right grade (for
hydraulic oil specification, see Section
5.1).
– Replace hood and secure with clamp
screws (4).
– Connect fan.
– Push seat into position and engage
locking lever (2).
3
5
4
2
6