1003
.GB
D 8
6.2
On Board Computer (
o
)
Battery Discharge Display:
The charge status of the battery (15) is shown in 10%
increments on the display.
M
The serial setting of the battery discharge display / discharge monitor is applied to
standard batteries.
When using maintenance free batteries the display must be set so that the symbol (T)
appears after the percentage figure. If this setting is not carried out the battery may
be damaged because of excessive depletion.
When adjusting the instrument the manufacturer’s service department must be called
in. .
The battery must be charged when there is a battery residual capacitance of 20% for
standard batteries or 40% for maintenance free batteries.
Battery Discharge Monitor:
Lifting is cut out when the residual capacity falls below
the required level. An appropriate message will be shown on the driver’s display unit.
Lfiting will only be restored when the connected battery is charged up to 70% of
maximum.
Remaining Time Display:
The Battery Remaining Time Display is an option which
can be activated via a parameter in the service mode.
The remaining time is shown up to 20% residual capacity (for maintenance batteries
40%)
Alternatively the Battery Remaining Time display is shown as a percentage figure
(15) under the battery symbol (Format R 00:00).
OK
0
CE
8
TUV
7
PQRS
9
WXYZ
5
JKL
4
GHI
6
MNO
2
ABC
1
3
DEF
0009 h
08:45
km/h
50 % T
0
15
16
17
1003
.GB
D 8
6.2
On Board Computer (
o
)
Battery Discharge Display:
The charge status of the battery (15) is shown in 10%
increments on the display.
M
The serial setting of the battery discharge display / discharge monitor is applied to
standard batteries.
When using maintenance free batteries the display must be set so that the symbol (T)
appears after the percentage figure. If this setting is not carried out the battery may
be damaged because of excessive depletion.
When adjusting the instrument the manufacturer’s service department must be called
in. .
The battery must be charged when there is a battery residual capacitance of 20% for
standard batteries or 40% for maintenance free batteries.
Battery Discharge Monitor:
Lifting is cut out when the residual capacity falls below
the required level. An appropriate message will be shown on the driver’s display unit.
Lfiting will only be restored when the connected battery is charged up to 70% of
maximum.
Remaining Time Display:
The Battery Remaining Time Display is an option which
can be activated via a parameter in the service mode.
The remaining time is shown up to 20% residual capacity (for maintenance batteries
40%)
Alternatively the Battery Remaining Time display is shown as a percentage figure
(15) under the battery symbol (Format R 00:00).
OK
0
CE
8
TUV
7
PQRS
9
WXYZ
5
JKL
4
GHI
6
MNO
2
ABC
1
3
DEF
0009 h
08:45
km/h
50 % T
0
15
16
17
Summary of Contents for ETM/V 214
