Jungheinrich ETM/V 214, Operating Instructions Manual

Page: 47 / 97

1003
.GB
E 6
3 Starting the Truck
F
Before the truck is started, operated or a load unit raised, the driver must ensure that
there is no one standing in the danger area.
Daily tests and procedures before commencing work
– The entire truck (particularly wheels and lifting devices) to be inspected for
damage.
– Check whether the load chains are evenly tensioned
– Visibly check battery and cable connections
Adjusting the driver’s seat
Z
To achieve optimal seat cushioning the driver’s seat must be adjusted according to
the driver’s weight.
The driver’s seat must not be occupied when being adjusted driver’s weight.
To adjust the driver's weight :
– Pull the lever (9) in the direction of the
arrow and return.
Z
The previous weight setting is reset to
the minimum value
Setting range of seat suspension from
50 kg to 130 kg
– Move lever (9) again in the direction of
the arrow until the corresponding
weight mark on scale (18) is reached.
Then finally return lever.
– Sit on the driver’s seat
F
From the driver’s seat do not reach out
to the side wall / roof of cab.
Adjust ing the backrest
– Lift up locking lever (10) and adjust the tilt of the backrest (19).
– Release locking lever, the backrest is set
Adjusting the sitting position:
– Pull up the locking lever to locate the driver’s seat (8) in the direction of the arrow
and push the seat forwards or backwards to the desired position.
– Re-engage locking lever (8).
F
The driver’s seat must be securely located in the desired position. The position of the
driver’s seat must not be altered when driving.
Z
The seat adjustment refers to series standard design. For other designs refer to the
manufacturer’s adjustment instructions.
When adjusting ensure that all controls are within reach
10
18 9
8
19
1003
.GB
E 6
3 Starting the Truck
F
Before the truck is started, operated or a load unit raised, the driver must ensure that
there is no one standing in the danger area.
Daily tests and procedures before commencing work
– The entire truck (particularly wheels and lifting devices) to be inspected for
damage.
– Check whether the load chains are evenly tensioned
– Visibly check battery and cable connections
Adjusting the driver’s seat
Z
To achieve optimal seat cushioning the driver’s seat must be adjusted according to
the driver’s weight.
The driver’s seat must not be occupied when being adjusted driver’s weight.
To adjust the driver's weight :
– Pull the lever (9) in the direction of the
arrow and return.
Z
The previous weight setting is reset to
the minimum value
Setting range of seat suspension from
50 kg to 130 kg
– Move lever (9) again in the direction of
the arrow until the corresponding
weight mark on scale (18) is reached.
Then finally return lever.
– Sit on the driver’s seat
F
From the driver’s seat do not reach out
to the side wall / roof of cab.
Adjust ing the backrest
– Lift up locking lever (10) and adjust the tilt of the backrest (19).
– Release locking lever, the backrest is set
Adjusting the sitting position:
– Pull up the locking lever to locate the driver’s seat (8) in the direction of the arrow
and push the seat forwards or backwards to the desired position.
– Re-engage locking lever (8).
F
The driver’s seat must be securely located in the desired position. The position of the
driver’s seat must not be altered when driving.
Z
The seat adjustment refers to series standard design. For other designs refer to the
manufacturer’s adjustment instructions.
When adjusting ensure that all controls are within reach
10
18 9
8
19