Jungheinrich ETM/V 214, Operating Instructions Manual

Page: 76 / 97

E 35
1003
.GB
The following parameters may be entered.
Code Key Parameter List
No. Function Setting Range Standard
Setting
Comments
Workflow
Code Key
000 Changes the Master Code
The length (4-6 digits) of
the master code also pre-
determines the length of
the operator code. (4-6
digits). As long as
operator codes are
programmed only a code
of the same length can be
entered. If the code length
is changed then all
operator codes should be
deleted beforehand.
0000 - 9999
or
00000 - 99999
or
000000 - 999999
7295 (LED 67 flashes)
Input of
current code
confirm (Set)
(LED 68 flashes)
Input of
new code
confirm (Set)
(LED 69 flashes)
Repeat new code
confirm (Set)
001 Add operator code (max.
600)
0000 - 9999
or
00000 - 99999
or
000000 - 999999
2580 (LED 68 flashes)
Input of
Code
confirm (Set)
(LED 69 flashes)
Repeat Input of
Code
confirm (Set)
E 35
1003
.GB
The following parameters may be entered.
Code Key Parameter List
No. Function Setting Range Standard
Setting
Comments
Workflow
Code Key
000 Changes the Master Code
The length (4-6 digits) of
the master code also pre-
determines the length of
the operator code. (4-6
digits). As long as
operator codes are
programmed only a code
of the same length can be
entered. If the code length
is changed then all
operator codes should be
deleted beforehand.
0000 - 9999
or
00000 - 99999
or
000000 - 999999
7295 (LED 67 flashes)
Input of
current code
confirm (Set)
(LED 68 flashes)
Input of
new code
confirm (Set)
(LED 69 flashes)
Repeat new code
confirm (Set)
001 Add operator code (max.
600)
0000 - 9999
or
00000 - 99999
or
000000 - 999999
2580 (LED 68 flashes)
Input of
Code
confirm (Set)
(LED 69 flashes)
Repeat Input of
Code
confirm (Set)