Jungheinrich ETM/V 214, Operating Instructions Manual

Page: 66 / 97

E 25
1003
.GB
The four short stroke keys are used to:
– regulate travel speed (slow travel switch),
– apply or release the handbrake (brake switch),
– change display to service mode (shift key) and
– select between travel and lift mode.
The display shows:
– Steering angle in 30° increments (as arrow)
– Steering mode of 180° or 360° (2 or 4 segments are shown,)
– Drive or lift profile (as 1, 2 or 3),
– The set speed (drive direction) of current profile (bars 1 to 5 ),
– The set speed (lift) of the current profile (bars 1 to 5,
– The discharge status of the battery in 10% increments ( 0 – 100%),
– Battery discharge warning (flashing battery symbol and buzzing tone),
– Operating hours : complete hours)
– Time (hours: minutes),
– Lift height in mm (5 digit),
– Maximum lift height in mm (5 digit),
– Load weight in kg (4 digit)
– The time remaining for built in battery (hours: minutes),
– Warning and fault messages as text (14 segment display),
– Service mode parameters
– Service mode diagnostics.
The coloured lights indicate
– Forks in horizontal position (green graphic symbol),
– Sideshift in central position (green graphic symbol),
– Lift limit reached (yellow graphic symbol),
– Slow travel (green graphic symbol),
– Dead man pedal not activated (yellow graphic symbol),
– Service mode active (yellow graphic symbol),
– Service interval expired (yellow graphic symbol spanner flashes),
– Overtemperature (red graphic symbol),
– Battery unlocked (red graphic symbol),
– Parking brake applied (red graphic symbol),
– Warning, warning triangle (red graphic symbol),
– Fault, STOP sign (red graphic symbol).
E 25
1003
.GB
The four short stroke keys are used to:
– regulate travel speed (slow travel switch),
– apply or release the handbrake (brake switch),
– change display to service mode (shift key) and
– select between travel and lift mode.
The display shows:
– Steering angle in 30° increments (as arrow)
– Steering mode of 180° or 360° (2 or 4 segments are shown,)
– Drive or lift profile (as 1, 2 or 3),
– The set speed (drive direction) of current profile (bars 1 to 5 ),
– The set speed (lift) of the current profile (bars 1 to 5,
– The discharge status of the battery in 10% increments ( 0 – 100%),
– Battery discharge warning (flashing battery symbol and buzzing tone),
– Operating hours : complete hours)
– Time (hours: minutes),
– Lift height in mm (5 digit),
– Maximum lift height in mm (5 digit),
– Load weight in kg (4 digit)
– The time remaining for built in battery (hours: minutes),
– Warning and fault messages as text (14 segment display),
– Service mode parameters
– Service mode diagnostics.
The coloured lights indicate
– Forks in horizontal position (green graphic symbol),
– Sideshift in central position (green graphic symbol),
– Lift limit reached (yellow graphic symbol),
– Slow travel (green graphic symbol),
– Dead man pedal not activated (yellow graphic symbol),
– Service mode active (yellow graphic symbol),
– Service interval expired (yellow graphic symbol spanner flashes),
– Overtemperature (red graphic symbol),
– Battery unlocked (red graphic symbol),
– Parking brake applied (red graphic symbol),
– Warning, warning triangle (red graphic symbol),
– Fault, STOP sign (red graphic symbol).