Jungheinrich ETM/V 214, Operating Instructions Manual

Page: 22 / 97

B 11
1003
.GB
3.4 EN Standards
Constant Noise Level: 68 dB(A)
In accordance with EN 12053 complies with ISO 4871.
Z
The constant noise level is calculated in accordance with standard guidelines and
takes into account the noise levels when driving, lifting and idling. The noise level is
measured at the driver’s ears.
Vibration: 0.66 m/s
2
In accordance with EN 13059.
Z
According to standard guidelines the vibration acceleration exerted on the driver’s
body when driving is the linear integrated weighted vertical acceleration. It is
ascertained when driving over humps at constant speed.
Electromagnetic Compatability (EMC)
The manufacturer confirms that the truck does not
exceed the limits for electromagnetic fault emission and
jamming resistance. The truck has been tested for the
discharge of static electricity in accordance with
EN 12895 as well as the standard instructions contained
therein.
Z
Changes to electrical and electronic components and their arrangement may only be
made with the written persmission of the manufacturer.
3.5 Condition for Use
Ambient Temperature.
- during operation -25
°
C to +40
°
C
Special equipment and authorisation is required for trucks designed to be used
constantly below 0
°
C or in conditions subject to extreme changes in temperture or
air humidity.
B 11
1003
.GB
3.4 EN Standards
Constant Noise Level: 68 dB(A)
In accordance with EN 12053 complies with ISO 4871.
Z
The constant noise level is calculated in accordance with standard guidelines and
takes into account the noise levels when driving, lifting and idling. The noise level is
measured at the driver’s ears.
Vibration: 0.66 m/s
2
In accordance with EN 13059.
Z
According to standard guidelines the vibration acceleration exerted on the driver’s
body when driving is the linear integrated weighted vertical acceleration. It is
ascertained when driving over humps at constant speed.
Electromagnetic Compatability (EMC)
The manufacturer confirms that the truck does not
exceed the limits for electromagnetic fault emission and
jamming resistance. The truck has been tested for the
discharge of static electricity in accordance with
EN 12895 as well as the standard instructions contained
therein.
Z
Changes to electrical and electronic components and their arrangement may only be
made with the written persmission of the manufacturer.
3.5 Condition for Use
Ambient Temperature.
- during operation -25
°
C to +40
°
C
Special equipment and authorisation is required for trucks designed to be used
constantly below 0
°
C or in conditions subject to extreme changes in temperture or
air humidity.