Jungheinrich ETM/V 214, Operating Instructions Manual

Page: 56 / 97

E 15
1003
.GB
Braking with the Reversing Brake:
– Press the direction switch (26) during travel. The direction of travel will be reversed
and the brakes applied bythe traction current controller until the truck travels in the
opposite direction.
Z
This type of operation reduces energy consumption. There will be a regeneration of
energy, governed by the traction current controller. The driver display panel or the on
board computer will indicate energy recovery.
Braking with the Rollout Brake:
– Release accelerator during travel; the
brake will be applied by the traction
current controller according to the
position of the accelerator.
Braking with the Service Brake:
– Press the brake pedal (12).
The vehicle will be braked by the reverse
current in the traction motor and where
necessary by the electric load wheel
brakes.
26
12
11
12
11
E 15
1003
.GB
Braking with the Reversing Brake:
– Press the direction switch (26) during travel. The direction of travel will be reversed
and the brakes applied bythe traction current controller until the truck travels in the
opposite direction.
Z
This type of operation reduces energy consumption. There will be a regeneration of
energy, governed by the traction current controller. The driver display panel or the on
board computer will indicate energy recovery.
Braking with the Rollout Brake:
– Release accelerator during travel; the
brake will be applied by the traction
current controller according to the
position of the accelerator.
Braking with the Service Brake:
– Press the brake pedal (12).
The vehicle will be braked by the reverse
current in the traction motor and where
necessary by the electric load wheel
brakes.
26
12
11
12
11