Jungheinrich ETM/V 214, Operating Instructions Manual

Page: 37 / 97

1003
.GB
D 6
6 Battery Discharge Display, Battery Discharge Monitor, Hourmeter
6.1 Driver’s Display (
t
)
Battery Discharge Display: The charge status of the battery (10) is displayed in
10% increments on the driver’s display unit.
M
The serial setting for the battery discharge display / discharge monitor is applied to
standard batteries.
The battery must be charged when there is a battery residual capacitance of 20% for
standard batteries or 40% for maintenance free batteries.
Battery Discharge Monitor: Lifting is cut out when the residual capacity falls below
the required level. An appropriate message will be shown on the driver’s display unit.
Z
Lifting will only be restored when the connected battery is charged up to 70% of
maximum.
Remaining Time Display: The remaining time is shown up to 20% residual capacity
(for maintenance batteries 40%)
To display the remaining time the 7 segment display above battery (11) can be
switched over by activating the shift key (13) for 3 seconds.
Z
It switches between actual time and time remaining.
10
11
14 13
12
1003
.GB
D 6
6 Battery Discharge Display, Battery Discharge Monitor, Hourmeter
6.1 Driver’s Display (
t
)
Battery Discharge Display: The charge status of the battery (10) is displayed in
10% increments on the driver’s display unit.
M
The serial setting for the battery discharge display / discharge monitor is applied to
standard batteries.
The battery must be charged when there is a battery residual capacitance of 20% for
standard batteries or 40% for maintenance free batteries.
Battery Discharge Monitor: Lifting is cut out when the residual capacity falls below
the required level. An appropriate message will be shown on the driver’s display unit.
Z
Lifting will only be restored when the connected battery is charged up to 70% of
maximum.
Remaining Time Display: The remaining time is shown up to 20% residual capacity
(for maintenance batteries 40%)
To display the remaining time the 7 segment display above battery (11) can be
switched over by activating the shift key (13) for 3 seconds.
Z
It switches between actual time and time remaining.
10
11
14 13
12