1
VESTIL MANUFACTURING CORPORATION
2999 North Wayne Street, P.O. Box 507
Angola, Indiana 46703 USA
Phone (260) 665-7586 • Fax (260) 665-1339
[email protected] • www.vestil.com
INTRODUCTION
Welcome to our Series EPT Powered Pallet Trucks. Your truck is
made of high quality steel and is designed for durable, reliable, and
easy operation. It could be easily used in any place such as a factory,
warehouse, supermarket, or distribution center to save energy and
time with no pollution to the working environment. For your safety
and correct operation, please carefully read this instruction book and
warnings on the truck before using it.
NOTE: All of the information reported herein is based on data
available at the time of printing. We reserve the right to modify it
without notice and without incurring any sanction. So, it is suggested
to always verify possible updates.
WARNINGS & SAFETY INSTRUCTIONS
Read owner's manual completely before operating unit!
• Do not operate this truck unless you are trained and authorized.
• Do not overload the truck. Check capacity plate for loading
weight and lifting height. Do not handle unstable or loosely
stacked loads.
• Operate truck only from designated operating load position.
Never place any parts of your body under the truck or near
moving parts. Do not ride or carry passengers.
• The weight of goods should be distributed evenly on two forks.
Do not use only one fork or put the goods on the end of the
forks.
• Before leaving the truck, remember to fully lower and set the
parking brake by making sure the handle is in the vertical
position. Turn off the power with the switch key.
• Travel slowly and with caution on slopes.
RECEIVING INSTRUCTIONS
Every unit is thoroughly tested and inspected prior to
shipment. However, it is possible that the unit may incur
damage during transit. If you see damage when unloading
make a note of it on the SHIPPER RECEIVER.
Remove all packing and strapping material, inspect
for damage. IF DAMAGE IS EVIDENT, FILE A CLAIM WITH
THE CARRIER IMMEDIATELY! Also, check the unit size, type
of power unit, etc., to ensure the unit is correct for the intended
application.
Contents
Introduction ...................................................... 1
Warnings and Safety Instructions ..................... 1
Receiving Instructions ..................................... .2
Operating Instructions....................................1-3
POWERED PALLET TRUCK
EPT-2047-30 • EPT-2547-30
SAFETY INSTRUCTIONS &
OPERATING MANUAL
Revised 05-29-07
A company dedicated to solving ergonomic and material
handling problems since 1955.
ELECTRIC PALLET TRUCK
EPT-2547-3
Battery & Battery Charger ................................ 2
MSDS Sheets ................................................ 4-7
Warranty Policy ................................................ 8
Duty Cycle / Capacity........................................2
•
Do not ride on equipment
•
Do not operate without training.
•
Do not use damaged trucks.
•
Do not move truck if anyone is between truck
and fixed object.
•
Keep feet clear when lowering.
•
Do not use on loads higher than 3 feet unless
load is secured.
•
Do not handle loosely stacked loads.
•
Use extra care when handling tall, wide,
and long loads.
•
Avoid holes, slippery floors, and loose objects.
•
Do not exceed rated capacity.
•
Perform maintenance as shown in owners
manual.
•
Observe operating and maintenance
instruction in owners manual.
•
Disconnect batteries when servicing.
VESTIL MANUFACTURING CORPORATION
Angola, Indiana USA
(260) 665-7586 • www.vestil.com
WARNING
!
1.
1.
.. SERVICE & MAINT. MANUAL AVAILABLE ONLINE @ www.vestil.com
MADE IN P.R.C.
