D*AP8
86
Setup GUI – EVENTS
–
Overview
The
D*AP8
offers a sophisticated
event management
system.
The event management system performs A
ctions.
These
Actions
are built from
Events
.
Actions
may be triggered manually (via the
X*AP RM
1
remote panel
Hotkeys)
, semi-automatically
(triggered by network commands or GPIs) and automatically (triggered by changes of parameters and/or
the internal status) or as a combination of all three.
The overview shows the building blocks of the
EVENTS
system of the
D*AP8.
The examples further below
are taken from the actual set of factory pre-set events based on a number of useful presets:
A
trigger
is subdivided into a trigger
type
and a trigger
source
. E.g. a GPI is a trigger type while its
number (the physical input) represents the trigger source. Other trigger types have sources which must
be configured, like the names of
X*AP
Hotkeys
or network triggers.
Hotkey Sources
You may assign hotkeys of the
X*AP
remote and / or the
mobile UI
to become a trigger source.
Network Sources
Received via the l-s-b EmBER+ protocol.
Parameter Sources
Device parameters / status information grouped into
systems and Interfaces.
The triggers will be defined by its trigger equation that may be the logical combination of 2 trigger
sources.
The
D*AP8
knows five different
event types
:
Preset Events (Profiles)
System / Interfaces / Routing / Dolby Processing /
Audio Processor / Programs / AUX / Delay / Monitor / Measurement
Parameter Events
System / Measurement
Measurement Events
Loudness 4 x 2 / Loudness 5.1 + 2
I/O Events
GPOs
Bypass Events
Programs / AUX
