D*AP8
24
Setup GUI – SYSTEM –
SNMP
This pane is meant for basic settings of the
SNMP
Agent
of the device. If you are not familiar with the use of
SNMP protocol for system monitoring you should not enable the SNMP agent.
Setup GUI – SYSTEM –
Backup / Restore
Here you can
backup
the complete
device
and
restore
parts or all of it .If you press
<backup>
the device
controller will collect all necessary data and assemble it to an XML file. Finally you will get a pop up message:
You must select :
<Save File>
.
After pressing
<OK>
, the
system file dialog opens :
Select a folder
and alter that default file name
if needed.
Similar applies to the restore process. You must select the desired backup file which you want to restore and
check the necessary option(s) under "Restore Device Configuration".
