D*AP8
26
Interface 1
SDI/O
You may also update the firmware of an optionally installed SDI board
or other interface boards.
Firmware
Display of actual installed firmware.
Status
[The latest firmware is installed. /
A firmware update is available
]
Update Firmware
[Load External File / x.y.z.]
You can decide if you want to upload it manually or take the latest
module firmware "x.y.z" that came with the release image
(recommended). You may
<Browse…>
the file system and select a file
of your choice.
Interface 2
If you have two interface boards installed, similar applies to the second
one.
Slot A
Dolby Decoder / E-Encoder (CAT1100)
For the example above we have the optional Dolby decoder installed.
It is based on the Dolby OEM board CAT1100.
The status says: "The latest firmware is installed".
<reset dolby decoder /
Pressing this soft button will warm start that module.
e-encoder (cat1100)>
Slot B
Coprocessor (JDSPA)
For the example above we have the optional
Coprocessor
installed.
It is based on the
JDSPA
module.
<reset coprocessor
Pressing this soft button will warm start that module.
jdspa)>
Licensing
Here you can see a list of the licensed options of the
D*AP
family.
<save license info>
When you buy a license you must provide the "
license info"
file which
you may obtain here.
Load License File
In return you will get a "
license"
file which you must apply to the device
here. You must
<Browse …>
to find the respective license file (which
you have unzipped before) and press
<apply new license>
.
Setup GUI – SYSTEM –
Reboot
Restore Factory defaults
Will clean up the parameter and preset memory and will initialize all
parameters to their factory default values and will reset passwords
and turn authentication off.
Overwrite Current IP
You may exclude the current IP settings from this process
IP Configuration
to keep your existing settings.
