D*AP8
19
Primary NTP Server
[5.9.110.236] default set to a publicly accessible NTP server via internet.
This is used for device testing an may be overwritten at any time.
Secondary NTP Server
[10.110.2.7] default set to an internal NTP server from Junger Audio.
This is used for device testing and may be overwritten at any time.
If no secondary NTP server is available set the address to 0:0:0:0 to avoid
an error message regarding duplicated NTP server address setting.
Important Note!
If it is impossible to synchronize the internal clock to one of the two NTP servers an
SNMP
"ntpStatusTrap" will be issued by the SNMP agent (if enabled SYSTEM > SNMP > Enable = ON).
Update Rate (min)
[1 … 1440]
Interval of synchronizing the internal clock of the
D*AP4
.
Setup GUI – SYSTEM –
Setup
Program Configuration
[5.1 + 2 / 4 x 2]
Shows the program configuration (2 times 2 channel). This is also
the default configuration of the audio processing blocks.
Program Labels
Each of the two possible programs has a name that will be used
Program 1 - 4
as a reference for the display of parameters and their setup.
Current Sync Source Status
shows the status of the 5 tier sync priority circuit
Source
active sync source
Sample Rate
measured sample rate
Show detailed status
[ON / OFF]
If you enable the checkbox you will get detailed information about
the measured rates of possible sync sources.
